Horizontal Panel Saw

Scoring unit

Sliding table.

Crosscut fence.

stop block

  power switch and Emergency Push Buttons 

Large extraction hood.

Switch off the drives.
• Set the saw blade to the upper height setting and tilt to 0°.
• Switch off the main switch.
• Move the upper carriage to the middle of the saw drive shaft, unlock the
lock in the centre.
• Push the upper carriage in the cutting direction.
• Raise the red cover plate.
• Use the ring spanner (1) to release the screw.
• Insert locking pin (2) through table plate and saw shaft.
• Unscrew the nut (3) with ring spanner SW55 by turning it to the right.

Changing the saw blade